700R4 Beast 2.84 Ratio 1100+ HP Transmission
700R4 Beast 2.84 Ratio 1st Gear Racing Transmission 1100+ HP !
Got a Killer Street Car and You are in need of some Overdrive?
The Answer = 700R4 Beast !
Now available with Transbrake full manual !!!
We prove to our customers what products we use with a step by step Photo shoot of each performance Build we do by request you can send in photos of your ride and we will include them in the shoot and post them on our main site and Socials.
This 700R4 was designed for the extreme high performance street or strip car or truck 2wd or 4x4 applications
for engines producing up to 1100+ hp .
If you are in a RUSH or need a transmission sooner we can not help you Sorry.
We focus on quality not quantity this is why we have so much success!
New input drum upgrade available on all 700r4/4L60 builds the 4L79 Drum custom built for Animal Performance with our logo on it.
RIGIDITY RIGIDITY RIGIDITY – its only part of what you get, the icing on the cake is the massive amount of new clutch surface area.
Starting with a bottom pressure plate thats been laser cut from a rigid material and then machined for fitment and to maximize clutch stack up height.
From there we machine the input housing to allow the use of custom larger outside diameter steels. Machining of the drum also consist of milling the top flat to again achieve more clutch stack up height, then threading the outside of the drum.
A top pressure plate / drum cap is machined from 6061 aluminum billets, machined threaded and profiled to match the drum. The aluminum helps shed the dreaded heat from the 3-4 clutch better than the other steel versions.
The Oem inner clutch hub / ring gear is then machined to match the internal tooth profile of th350 forward / direct friction clutches.
Using our custom steels and supplied Alto red frictions we’ve increased the outside diameter of the friction as well as shrunken the inside diameter creating a 3-4 clutch pack that now has 211% more friction surface area over a stock 4l60e – all while not having paper thin steels. Not only does it have that much more friction surface area, but that much more steel surface area as well, further aiding in heat dissipation. The wider based frictions and steels along with the wider, rigid bottom plate and billet top cap prevent all the bowing and coning weve all seen for so many years.
The billet end cap is threaded to the drum tying both drum and cap together making the pressure plate surface and drum rigid, eliminating the bowing and coning. If you choose to reinstall load release springs, provided are 5 new recalibrated load release springs and pins special to this clutch setup.
The threaded cap is locked into place to prevent spinoff using 5 set screws. By making the end cap aluminum, it transfers the heat from the top of the clutch pack into the billet cap and then into the input housing itself shedding the heat.
Add this new Input drum assembly to your build today upgrade cost is $400.00 it retails for $695.00.
APT Performance Features:
NoN - or Lockup Race Ready Front pump with Modified Valves
for Improved Converter Flow , Constant Pressures
Hardened Pump Rotor Rings , Slide / 10 vane
Sonnax Stator Support
Next is one of the key parts to reach this 1100+ hp rating
Featured in our Beast
Sonnax Hi-Tech 298mm Input Shaft and custom drum w/ billet pressure plates
HD Input Sprag ,L/R roller
All New Racing Frictions ,Kolene Steels
2 coast 5 forwards 10 3-4 Directs/Overdrive , 5 L/R
High Performance Carbon Fiber Wide band provide greater torque capacity and more positive band apply.
The Strongest Servos anywhere Billet Super servo's 1-2 & 3-4
Sonnax Smart Shell Bearing design
Teflon Bushing Kit with (Wide) Gear Train Bushings for Extra Support
GM OEM 5 Pin Rear Planet Upgrade
We wont use that junk Aftermarket Brand 5 pin that fails !
Sonnax Rebuildable 6 pin front Planet , sun gear w 2.84 ratio 1st gear not the stock 3.06
Great for 3:73 / 4:11 / 4:56 / 4:88 rear gears or lower This will give you a longer 1st gear pull and less rpm drop on 1-2 shift than a stock 700R4/4l60E
To Control the Beast
Automatic/Manual Constant Pressure valvebody
Full Manual Forward Pattern
No Cable Necessary " Animal design "
Aluminum Pan .
1 wire fire lockup
This Animal can handle up to 1100+HP
- Factory Case , Tail W/ Aluminum Pan Requires SFI Approved Sheild .
This is an Animal you can count on with 30 years experience building your transmission.
Straight to your Business or Residence.
In some cases you may have to pick it up at the nearest terminal to you !
Submit your address before purchasing to check for any shipping charges .
Worldwide Shipping Available ask for Quote !
1 Year Warranty on Transmission only.
2 Year Warranty on Trans, Converter
In the event of a warranty Buyer pays 100% Return Shipping !
Sometimes SHiz Happens In the event of a warranty the Buyer pays 100% Return Shipping !
Once your transmission arrives we will inspect it and repair or rebuild it and ship it back to you at No charge for Free Delivery Areas only .
We will call and advise you if we find any Converter installation clearances Issues and advise you how to correct it so it wont ever happend again.
Feel Free to contact us for more tech info or details or changes you want made .
Unleash The Animal In Your Ride Today !
We Also Recommend