4L70E 3.06-2.84 Beast Transmission 1100HP!
4L70E 3.06-2.84 Beast 1100HP
2006up with 15 pin transmission connector.
If your car or truck uses the top bolt hole and has a total of 7 bell locations bolts you have a 4L65E with 13 pin connector or 4L70E with 15 pin.
This Animal 4L70E was designed for the street or strip car or truck 2wd or 4x4 applications with engines producing up to 1100hp .
Submit your address zip code before purchasing to check for any shipping charges.
If you are in a RUSH or need a transmission now we can not help you Sorry.
We focus on quality not quantity this is why we have so much success!
New input drum upgrade available on all 700r4/4L60 builds the 4L79 Drum custom built for Animal Performance with our logo on it.
RIGIDITY RIGIDITY RIGIDITY – its only part of what you get, the icing on the cake is the massive amount of new clutch surface area.
Starting with a bottom pressure plate thats been laser cut from a rigid material and then machined for fitment and to maximize clutch stack up height.
From there we machine the input housing to allow the use of custom larger outside diameter steels. Machining of the drum also consist of milling the top flat to again achieve more clutch stack up height, then threading the outside of the drum.
A top pressure plate / drum cap is machined from 6061 aluminum billets, machined threaded and profiled to match the drum. The aluminum helps shed the dreaded heat from the 3-4 clutch better than the other steel versions.
The Oem inner clutch hub / ring gear is then machined to match the internal tooth profile of th350 forward / direct friction clutches.
Using our custom steels and supplied Alto red frictions we’ve increased the outside diameter of the friction as well as shrunken the inside diameter creating a 3-4 clutch pack that now has 211% more friction surface area over a stock 4l60e – all while not having paper thin steels. Not only does it have that much more friction surface area, but that much more steel surface area as well, further aiding in heat dissipation. The wider based frictions and steels along with the wider, rigid bottom plate and billet top cap prevent all the bowing and coning weve all seen for so many years.
The billet end cap is threaded to the drum tying both drum and cap together making the pressure plate surface and drum rigid, eliminating the bowing and coning. If you choose to reinstall load release springs, provided are 5 new recalibrated load release springs and pins special to this clutch setup.
The threaded cap is locked into place to prevent spinoff using 5 set screws. By making the end cap aluminum, it transfers the heat from the top of the clutch pack into the billet cap and then into the input housing itself shedding the heat.
Add this new Input drum assembly to your build today upgrade cost is $400.00 it retails for $695.00.
APT Performance Features:
Coan Racing / Sonnax / Superior Product
Resurfaced pump with Larger Valves for Improved Converter Flow , Pressure & Volume
13v Hardened Pump Rotor and Rings , Slide / vanes
New Stator support
- NEXT IS ONE OF THE KEY PARTS TO REACH THIS 1100+ HP RATING
Featured in our BeastSonnax Hi-Tech 300mm Input Shaft and custom drum w/ billet pressure platesHD Input Sprag ,L/R roller
All New Racing Frictions ,Kolene Steels
2 coast 5 forwards 10 3-4 Directs/Overdrive , 5 L/RHigh Performance Carbon Fiber Wide band provide greater torque capacity and more positive band apply.The Strongest Servos anywhere Billet Super servo's 1-2 & 3-4Sonnax Smart Shell Bearing designTeflon Bushing Kit with (Wide) Gear Train Bushings for Extra SupportGM OEM 5 Pin Rear Planet Upgrade 3.06 RatioWe don't use that junk Aftermarket Brand 5 pin that fails !5 pin front Planet
- Sonnax 6 pin 2.84 Planet Kit
- Bearing Style Hubs
TO CONTROL THE BEAST
Available Shift Feel Levelslight throttle to Wide open throttle1 = Mild to Firm2 = Firm to Hard !3 = Very Hard Tire Burning neck jerking Shifts!Deep Aluminum Pan
- Automatic Shifts Automatic/Manual control shifts with lockup style torque converter. Requires factory transmission computer or aftermarket transmission controller to control transmission .
- Factory Case , Tail W/ Aluminum Pan Requires SFI Approved Shield.
We prove to our customers what products we use with a step by step Photo shoot of each performance Build we do by request you can send in photos of your ride and we will include them in the shoot and post them on our main site and Socials.
This is an Animal you can count on with 30 years experience building your transmission!
Straight to your Business or Residence.
In some cases you may have to pick it up at the nearest terminal to you !
Worldwide Shipping Available ask for Quote !
In the event of a warranty buyer pays 100% return shipping !
With 30 + Years Experience you can trust us to do it Correct the first time !
Feel Free to contact us for more tech info or details or changes you want made .
Unleash The Animal In Your Ride Today!
We Also Recommend